Gp340 Programming Software Driver
Customer Programming Software (CPS) for the GP300/GM300 Series of conventional PL / 5 Tone radios. Skip navigation. I have a cable to program gp340, usbtypeA, GP-professional 13-pin. However the issue will be on new PC's drivers, as software drivers for Win XP and Win 98 are hard to come.
I've got the same problem. I have a Motorola GP380. This has the programming cable. I have tried to ComTest software and this finds the radio without any problems at all. I've been using the following two versions of programming software: - CPS Version R03.08.03 Professional GP300/GM300 series CPS. CPS Version D03.02.01 series CPS Neither of these works.
The radio can be found and using the ComTest software on ALL COM ports without any issues. I have tried this on Windows XP Pro SP3 as well as an older copy of Windows 2000 Pro and get the same issue on BOTH machines. I've since been able to get an older machine running Windows 2000 to read and write the codeplug. The only changes I made were to the hardware settings for the COM ports. I changed what appeared to the default 9600 setting up to the maximum and rebooted the machine.
I also went through any services that may have had conflicts with com port access and either stopped them, uninstalled them or just killed the processes. For whatever reason, the system now reads from and writes to the radio just fine. The person that programmed our radios did it with an XP machine. I have tried with Win7 using a USB to serial dongle, I put the Win7 lapotp on a docking station to use the com port, I realized I have a desktop that is XP, I loaded CPS, I run the Comtest nd it sees the radio - I still get the same error no matter what 'CAN NOT CREATE, UNKNOWN RADIO COMPONENT'. It is though the CPS program cannot see via the com port.
I have read several articles that said CPS would ask which port, I don't get that. I am trying to program the GP360, the GM360, and a repeater CDM750.
Motorola Gp340
Gp340 Programming Software Driver
I have tried CPS versions Professional GP300/GM300 R03.11.15, Professional Radio CPS R06.12.04, and Professional Radio CPS R04.00.00. I am using a Maxton Model RPC-M300XX RIB. This RIB has been used successfully before but now when I try it gets this error.
Anything I haven't tried yet? I am in Afghanistan and I just can't run to my local Motorola shop to get help. Nananana.
0 USB Programming Cable for Motorola HT1250 HT750 HT1550 Description 6-031 Brand new good quality aftermarket RIBLESS (RIB box not required) programming cable. Works with these Motorola two-way radios: GP238, GP318, GP328, GP338, GP340, GP360, GP380 GP620, GP640, GP660, GP680, GP1280 HT750, HT1250, HT1250 LS, HT1250 LS+, HT1550, HT1550 XLS, HT915 MTX850, MTX850 LS, MTX860, MTX950, MTX8250, MTX8250 LS, MTX9250 PRO5150, PRO5350, PRO5450, PRO5550, PRO5750 PRO7150, PRO7350, PRO7450, PRO7550, PRO7750, PRO9150 Windows USB driver provided. Programming software not included.
Motorola Gp340 Frequency Range
Shipping Address Notice Turkey & Belgium Customs Notice USB Programming Cable Driver Download Com Programming Cable NO NEED TO USE DRIVER USB Drive Radio Software Other USB Cable Choose: Other Com Programming Cable Choose: Other Adaptor for Prog.Cable Choose: Other Cloning Cable Choose: 843 Com Port Cable Set Choose: USB Cable Set Choose: 843 Copyright © 2018 walkie talkies 409shop All Rights Reserved.